Call Us Now

 

Nearly everybody will have his or her own assumption with regards to How to Troubleshoot and Repair an Electric Water Heater.

Many modern homes utilize an electric hot water heater for their heating system, as a result of its comfort as well as simplicity of use. However, just like any other electric devices, issues may develop with its use, suddenly. It can be actually frustrating to wake up to a chilly shower instead of a warm one or having your bath with water that isn't warm adequate or even too hot. Whatever the case might be, hot water heater troubles can be fairly aggravating. Thankfully, we've made a checklist of feasible services to your hot water heater problems. There are a variety of elements that might trigger a lot of these problems, it could be a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you turn off the main power supply for safety and security. Whatever the trouble is, getting it fixed must not posture too much of an issue if you adhere to these steps:

 

Call An Expert:

If after changing all malfunctioning parts as well as resetting your temperature, the hot water heater still isn't functioning, you might need to call a professional plumber for a specialist viewpoint. The problem with your heating unit could be that the hot and cold taps have actually been changed or it might be undersized for the amount of warm water needed in your house. Whatever the instance may be, a specialist plumber would help address the problem.

 

Examine Your Power Supply:

As fundamental as this might appear, it is very necessary. Without appropriate power, your water heater will certainly not work. So the first thing to do when your water instantly retires is to validate that it isn't a power issue. Check if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the issue, merely turn it off and on once again. Change any type of busted or worn-out fuse. Check the appliance with power after these adjustments to see if it's currently working.

 

Inspect Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't warm enough, you might need to check the temperature setups on your top thermostat. Ensure the breaker is turned off prior to doing anything. Open the access panel as well as press the red button for temperature reset above the thermostat. This must assist heat the water. Turn the breaker back on and inspect if the trouble has actually been dealt with.

 

Inspect the Burner in the Hot Water Heater:

If it's not a power issue, after that attempt checking out your heating element if it is still working. Test each of your burner to ensure the issue isn't with any one of them. If any one of them is defective, change that component and then examine whether the hot water is back on.

 

Conclusion

Hot water heater troubles are not constantly significant. Most of them result from small concerns like a blown fuse or damaged burner. Replacing the defective components must work. Nevertheless, if you are still not able to solve the issue, give a call to your nearest plumber to come to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you enjoyed reading our post on How to Troubleshoot and Repair an Electric Water Heater. Thank you so much for spending some time to read through our blog post. If you enjoyed reading our blog posting please be sure to pass it around. Thank you so much for taking the time to read it.

Real results? Dial!